RAMSET M16x190 CHEMICAL BOLT GRADE 5.8

DESCRIPTION OF CHEMICAL BOLT RAMSET M16x190 GRADE 5.8
Ramset M16x190 chemical bolt, durability level 5.8, consists of 2 main parts

The M16x190 bolt part includes a 16mm diameter bolt body, 190m long + 1 M16 nut + 1 M16 flat bolt, M16 warp bolt can be added upon request. The bolt body usually has a hexagonal head, the other end is cut into a V shape and has a notch in the middle. Electrolytically galvanized chemical bolts have durability class 5.8
Chemical section. You can use chemicals in bottle form using a pump gun or M16 capsule chemicals
APPLICATION OF RAMSET M16x190 CHEMICAL BOLTS GRADE 5.8
Install railings
Installing glass facades and stone facades
Installing steel column legs and steel beams
Install canopy roof. Roof lobby
Install emergency stairs
Install ventilation fans
Fix the foot of the shelf.
Fixing pipes in high-rise buildings or factories, hospitals, schools,...
Install the tripod
CONSTRUCTION OPERATION OF RAMSET M16x190 CHEMICAL BOLT GRADE 5.8
Step 1: Drill an 18mm hole, 125mm deep in the concrete
Step 2: Use a brush and dust blower to clean the bore
Step 3: Pump chemicals into the borehole (If the chemical is in bottle form, use a pump gun) or place the capsule into the borehole (if the chemical is in capsule form)
Step 4: Insert the threaded rod into the drill hole so that the chemical flows out to the mouth (If the chemical is in bottle form, use a pump gun) or drill the threaded rod to break the capsule (If using chemicals in capsule form. The threaded rod is connected to the drill via a connection tool and drilled to break the capsule)
Step 5: Wait for the chemical to set and then install the load. Normally, if you use capsule chemicals, the time for the chemicals to set to maximum load is 30-45 minutes. If you use epoxy chemicals in bottle form using a pump gun, the average time to reach maximum load is 8 hours.
RAMSET M16X190 CHEMICAL BOLT FORCE SPECIFICATIONS GRADE 5.8
Traction force: 30KN corresponding to a mass of 3 tons
Cutting force: 30KN corresponding to a mass of 3 tons
The above parameters are recommended when used with C20/25 basic concrete